KRWCG-10W wet type cable granulation machine is in compact structure, it includes crusher, wave table, water circulation system and plastic filtration device.
KR400 Crusher
The blades’ structure is designed to chop copper wires, it can chop the wires with lower blades damage, the chopped granules are in uniform and the cutting section of the granules is flat and smooth then it will guarantee the separation performance of the hydro separator. Also, the crusher has material striker plate to prevent material jumping out during the process.
Hydro separator
It’s used to separate the high density(>1) material from the lower one(<1) due to the higher one will sink in the water and the lighter one will float on the water. After starting the vibration and water flashing in opposite direction, the high density material will move towards to the direction of the vibration and the lower one will be flashed to opposite direction.
The material of the vibration bed is made of #304 stainless steel and it’s bed surface is covered with a special PVC sheet to increase the friction to guarantee the separation performance.
The vibration movement is driven by the crank and rocker mechanism to keep the stabilization.
Water circulation system and plastic filtration device
The water circulation system can keep most of the metal particle within the system to reduce the production loose. Also, the flashing water take both of the plastic granules and metals particles to the filtration device and the plastic will not get through the sieve due to the over size and the metal particle will sink down to the bottom of the water tank. After a period of time, the metal mud can be cleaned out for sale.
Copper recovery rate |
99.8% |
|
Processing ability |
<25mm |
|
Dimension |
2700mm*1400mm*1800mm |
|
Weight |
800kg |
|
Motor Power |
8.15kw(7.5kw+0.4kw+0.25kw) |
|
10 hours production |
1000kg-2000kg |
Copper recovery rate |
99.8% |
|
Processing ability |
<25mm |
|
Dimension |
3200mm*2900mm*2300mm |
|
Weight |
2000kg |
|
Motor Power |
17.8kw |
|
10 hours production |
1500kg-3000kg |
Copper recovery rate |
99.8% |
|
Processing ability |
<30mm |
|
Dimension |
3300mm*3200mm*2300mm |
|
Weight |
2500kg |
|
Motor Power |
33.5kw |
|
10 hours production |
3000kg-6000kg |
Name |
Power |
|
Crusher |
30kw |
|
Pressurized Blower |
2.2kw |
|
Vibration Table |
0.4kw |
|
Dryer |
0.4kw |
|
Pump |
0.5kw |
Pre sale service:
1. We can recommend the proper proposal accordingly to meet customer’s request then help customer to choose the proper equipment.
2. Provide the detailed technical parameter of each equipment.
3. Free technical advice.
4. Introduce the relative equipment.
On-purchase service:
1. Report customer the working condition of the order regularly.
2. Pack the machine in export standard.
3. Notice the shipping date in advance.
After sales service
1.Installation&operation: We will guide the user to install the machine on line and help the user to adjust the machine when user changes the raw material. We will inquire user to learn the working condition of the machine regularly and give advice till the user totally know the machine.
2.Warranty: brand new when leaving the factory. we guarantee quality of the machines for a period of one year from the date of a trial run to the finish, but not to exceed thirteen months from the date of which machines away to the delivery port. If any parts (excluding easily damaging parts) are found defective in quality in the first year, the seller should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.
3.Long time free technical support.
Contact Us